Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Multiple VLANs per SSID with local switch

Is it possible to use an 'AP Group' or 'Interface group' to assign multiple VLANs to a WLAN when remote, h-reap APs are in local switch mode? 

If not, is there a way to overcome 500 maximum host per VLAN when APs are local switching?

Thanks!

Everyone's tags (3)
1 REPLY
Cisco Employee

Re: Multiple VLANs per SSID with local switch

dont think its possible...

I donno if the following config will even work but u can have the hreap APs connected at the remote site to map to different vlans...

Example:

AP1 -- ssid 1 --- vlan 10

AP2 -- said 1 --- vlan 11 and so forth..

Sounds crazy but i ll have to ponder on this a bit more.. Need a pen and paper to draw a quick topology :)...

Sent from Cisco Technical Support iPhone App

1962
Views
0
Helpful
1
Replies
CreatePlease login to create content