I have installed CAM and CAS version 4.0.3 in OOB mode and having this problem of clean access agent repeatedly popping up even after successfuly logging on to the server.
Also the clients are always requested to download and install the clean access agent even when it is already installed in the system.
After the succesfull log on I can see the respective client as sucessfully logged on to the system. Also the VLANs are correctly switched from Authentication to User VLANs, but still I'm repeatedly asked to log on to the system.
These symptoms familar to anybody and appreciate any idea to help me come out of this.
Usually the agent pops up when the agent discovery packtes hit the CAS. Can you check your routing? After the client is put into the access vlan, is it possible that the agent discovery packets still hit the CAS? Try to do sniffer on CAS interfaces to see if you still see agent traffic after agent is in access vlan.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...