Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

NAS-id parameter WLC

Hello,

I have two WLANs Corp (WPA2/802.1X) and  Guest network (CWA),  both using same NPS as RADIUS server. Two Network policy has been placed in NPS, one uses for Corp and other to Guest, where access is filter by NAS-Id parameter (RADIUS 32 field). NAS-Id expected to Guest WLAN is "guest-access"

Is it possible change this parameter (32 - NAS-Id) in WLC 5508 ?

This network policy works for other sites, where I have motorola wireless solution.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

NAS-id parameter WLC

Under Security > Radius > Authenticaiton, there is a drop down "Call Station ID Type".

Change it from System MAC to AP MAC Address:SSID.  so long as your policy allows for *guest-access it should work.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
1 REPLY

NAS-id parameter WLC

Under Security > Radius > Authenticaiton, there is a drop down "Call Station ID Type".

Change it from System MAC to AP MAC Address:SSID.  so long as your policy allows for *guest-access it should work.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
6624
Views
0
Helpful
1
Replies