We're looking to add a WCS server sometme in the near future. One of the features we're looking to use is generating heat maps. Can the standard version do this, or do we need the plus version. The plus version is needed to support the location appliance, correct? Does the plus version add anything to the heat maps, more accuracy?
Location appliance will provide you additionally the location on the heat maps of the clients (computers / ip devices) connected to your network. The heat map precisicion is the same on both versions. If you like you can calibrate and get the accuracy better but you can do this from any WCS flavor.
One last question on this... apparently, someone here has ordered 3 copies of something. They came in 3 separate white cardboard mailers with "Prod. #: WCS-STANDARD-K9" on the outside. Inside is a CD ("Cisco End User License and Warranty/Cisco Information Packet") and a license certificate that has "entitlement quantity" of 1 for WCS-STANDARD-K9 and WCS-PLUS-50...Is this actually three copies of the server license? Or is it just AP licenses?
I see, so each PAK refers to an individual server license and the 50 plus AP licenses don't have a separate PAK, correct? Just wanted to recap... I haven't installed or activated anything yet. I'll let them know here what's going on.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...