Re: need to configure Max Concurrent Logins for a user name on S
Using the WLC, there is not a good way of doing what you want. That login limit is global. The other thing is how are you authenticating users? If your using 802.1x, users should only be able to associate to one SSID, not both or else the policies can be tricky and not work. If users can only authenticate to one SSID, then you might be able to add a condition to the policy to check if the login has been used. If you don't have a radius server and just trying to use the WLC, then it's not possible.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...