Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NICs compatible with LEAP

So far I know that the aironet,airport, and xircom creditcard adapters are the only nics that support LEAP so far. I have also heard that Lucent cards support it as well. Can anyone confirm this? Anyone know of any other cards that can LEAP?

  • Security and Network Management
4 REPLIES
New Member

Re: NICs compatible with LEAP

I got this from the TAC today:

"The only client cards I know of that support LEAP is our Cisco Aironet cards and Apple's Airport cards. "

Good luck

New Member

Re: NICs compatible with LEAP

Thanks Alan.

New Member

Re: NICs compatible with LEAP

Any NIC with the Intersil/PRISM chipset (Compaq, Fujitsu on-board) can use the Odyssey client from Funk Software and get seamless LEAP authentication. Open and Require EAP Authentication settings must be activated on the Access Point for this to work.

Cisco Employee

Re: NICs compatible with LEAP

That would be EAP not LEAP

There is subtle differences between the 2.

LEAP is a Cisco protocol NOT standards based. EAP is standards based as defined under the 802.1x standard.

The previous post is correct only Cisco and the Airport cards support LEAP but many cards support EAP

191
Views
0
Helpful
4
Replies