Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Nokia Lumia support for Cisco WLC

Dear All,

I am using Cisco Wireless LAN Controller 4404 in my network, All devices (Laptops, samsung mobile phones, Iphone, HTC, etc) are connecting and working perfectly but NOKIA Lumia mobile phone is unable to connect.

Is there any hotfix for WLC available? please advise

Regards,

Junaid

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: Nokia Lumia support for Cisco WLC

Not sure which models are you using ? But as per this technical specs certain Lumia models do not support WAP2 Enterprise.

http://developer.nokia.com/Devices/Device_specifications/Comparison.xhtml?dev=Lumia_1020,Lumia_920,Lumia_925

(Under connectivity -> WLAN support you can find the below information)

Please check the technical spec of the phone model you are using & ensure it is supporting WAP2 Enterprise

HTH

Rasika

**** Pls rate all useful responses ****

5 REPLIES
Cisco Employee

Nokia Lumia support for Cisco WLC

debug client < client mac >

while you are trying to connect , so that we can tell you at which stage the phone is suffering

Hall of Fame Super Gold

Re: Nokia Lumia support for Cisco WLC

1.  What firmware is your WLC running?

2.  Create an OPEN SSID and see if the Nokia can join the wireless network.

3.  As with maldehne has stated, post the output to the command "debug client " while it is trying to join so we can see what is going on.

New Member

Re: Nokia Lumia support for Cisco WLC

Please find below debug details, I started debugging the device by command debug client (client mac) and then tried to connect the device.

*dot1xMsgTask: Sep 25 12:14:03.096: ec:f3:5b:d3:99:20 dot1x - moving mobile ec:f3:5b:d3:99:20 into Connecting state

*dot1xMsgTask: Sep 25 12:14:03.097: ec:f3:5b:d3:99:20 Sending EAP-Request/Identity to mobile ec:f3:5b:d3:99:20 (EAP Id 1)

*Dot1x_NW_MsgTask_0: Sep 25 12:14:03.148: ec:f3:5b:d3:99:20 Received EAPOL START from mobile ec:f3:5b:d3:99:20

*Dot1x_NW_MsgTask_0: Sep 25 12:14:03.148: ec:f3:5b:d3:99:20 dot1x - moving mobile ec:f3:5b:d3:99:20 into Connecting state

*Dot1x_NW_MsgTask_0: Sep 25 12:16:05.035: apfGetRsnIE: Processing WPA/RSN IE type 48, length 56 processed only 38 bytes

*Dot1x_NW_MsgTask_0: Sep 25 12:16:05.076: apfGetRsnIE: Processing WPA/RSN IE type 48, length 56 processed only 38 bytes

*Dot1x_NW_MsgTask_0: Sep 25 12:16:05.076: apfGetRsnIE: Processing WPA/RSN IE type 48, length 56 processed only 38 bytes

*Dot1x_NW_MsgTask_0: Sep 25 12:16:05.076: apfGetRsnIE: Processing WPA/RSN IE type 48, length 56 processed only 38 bytes

*Dot1x_NW_MsgTask_0: Sep 25 12:16:05.112: apfGetRsnIE: Processing WPA/RSN IE type 48, length 56 processed only 38 bytes

And on cell phone it shows the following message:

connection unsuccessful,

the credentials provided by the server couldn't be validated,

I tried to connect it without any encryption and it got connected successfully, issue only on wpa2-Enterprise.

Please advise,,,

Regards,

Junaid

VIP Purple

Re: Nokia Lumia support for Cisco WLC

Not sure which models are you using ? But as per this technical specs certain Lumia models do not support WAP2 Enterprise.

http://developer.nokia.com/Devices/Device_specifications/Comparison.xhtml?dev=Lumia_1020,Lumia_920,Lumia_925

(Under connectivity -> WLAN support you can find the below information)

Please check the technical spec of the phone model you are using & ensure it is supporting WAP2 Enterprise

HTH

Rasika

**** Pls rate all useful responses ****

1158
Views
0
Helpful
5
Replies