06-30-2007 02:42 AM - edited 07-03-2021 02:16 PM
What to choose normal or local or monitor?
I want to add these 3 features but see:
1)To enable Rogue Access Point Detection; AP should be in local mode or normal
2)To Configure MFP; AP should be in local mode or Monitor
3)To Configure CCX Radio Management; AP should be in Normal mode or Monitor
So, what to choose: (local, monitor or normal)?
Solved! Go to Solution.
07-11-2007 06:56 AM
Hi sbarasiscom,
I reckon you'd have to have a second AP in the same area to act as a sniffer or rogue detector or whatever you want to do with it.
Hope this helps
Scott
07-05-2007 11:58 AM
1. Monitor mode, 2) Monitor mode, 3) Loal Mode.
07-06-2007 10:25 PM
Thanks aghaznavi,
but if I want to apply 3 at the smae time , I have to apply only one.... So what to select
07-11-2007 06:56 AM
Hi sbarasiscom,
I reckon you'd have to have a second AP in the same area to act as a sniffer or rogue detector or whatever you want to do with it.
Hope this helps
Scott
07-11-2007 07:08 AM
Thanks Scott,
And that's what I am looking to do,
08-20-2007 07:48 AM
Belated Thanks for the points
Scott
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: