Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

normal or local or monitor

What to choose normal or local or monitor?

I want to add these 3 features but see:

1)To enable Rogue Access Point Detection; AP should be in local mode or normal

2)To Configure MFP; AP should be in local mode or Monitor

3)To Configure CCX Radio Management; AP should be in Normal mode or Monitor

So, what to choose: (local, monitor or normal)?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: normal or local or monitor

Hi sbarasiscom,

I reckon you'd have to have a second AP in the same area to act as a sniffer or rogue detector or whatever you want to do with it.

Hope this helps

Scott

5 REPLIES
Silver

Re: normal or local or monitor

1. Monitor mode, 2) Monitor mode, 3) Loal Mode.

New Member

Re: normal or local or monitor

Thanks aghaznavi,

but if I want to apply 3 at the smae time , I have to apply only one.... So what to select

New Member

Re: normal or local or monitor

Hi sbarasiscom,

I reckon you'd have to have a second AP in the same area to act as a sniffer or rogue detector or whatever you want to do with it.

Hope this helps

Scott

New Member

Re: normal or local or monitor

Thanks Scott,

And that's what I am looking to do,

New Member

Re: normal or local or monitor

Belated Thanks for the points

Scott

182
Views
0
Helpful
5
Replies
CreatePlease to create content