Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Option 43 on Win2003 Server with 1131 and 1242 in the same scope

Hello

Is it possible to have in the same dhcp scope both spezific vendor class options (1131 and 1242) on a windows 2003 server?

thanks for helping

Oliver

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Option 43 on Win2003 Server with 1131 and 1242 in the same s

Hi,

You should be able to accomplish this with the Win2K3 server. I've attached a screenshot for your reference. The scope has separate Vendor Class Identifiers for the AP1240 and AP1130.

With an IOS DHCP Server, you can shorten the Option 60 VCI to "Cisco AP" and it should work for the APs that begin with the "Cisco AP" VCI string. However, this does not work on Windows DHCP Servers, so the full VCI strings are required (as in the screenshot).

Regards,

Ben

1 REPLY
Cisco Employee

Re: Option 43 on Win2003 Server with 1131 and 1242 in the same s

Hi,

You should be able to accomplish this with the Win2K3 server. I've attached a screenshot for your reference. The scope has separate Vendor Class Identifiers for the AP1240 and AP1130.

With an IOS DHCP Server, you can shorten the Option 60 VCI to "Cisco AP" and it should work for the APs that begin with the "Cisco AP" VCI string. However, this does not work on Windows DHCP Servers, so the full VCI strings are required (as in the screenshot).

Regards,

Ben

459
Views
5
Helpful
1
Replies
CreatePlease to create content