Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Passthru authentication web page and SSL certificate

I have two questions:

We had a passthru authentication page working on our controllers with version 4.1.95.0 and it is not working after the upgrade to 4.2. What changed between releases?

How do I generate a CSR for the web authentication page so I can get a verisign/entrust key loaded on the controller? Is it as simple as the process in document ID: 98599? Does the web authentication process use same ssl key as the controller management interface or is it a different key?

2 REPLIES
New Member

Re: Passthru authentication web page and SSL certificate

You want document 70584 for WLCs (98599 is for WCS):

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

You can use seperate keys for web admin and web auth (transfer download datatype webadmincert/webauthcert).

Erik

Hall of Fame Super Silver

Re: Passthru authentication web page and SSL certificate

Something happened during the upgrade. Recheck the configuration again.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

-Scott
*** Please rate helpful posts ***
249
Views
0
Helpful
2
Replies