Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

peap authentication issue

I have some problems with peap authentication. Here debug of my AP:

Mar 13 09:50:39 10.15.1.14 2370: *Mar 1 19:24:18.889: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start

Mar 13 09:50:39 10.15.1.14 2371: *Mar 1 19:24:18.890: dot11_auth_dot1x_send_id_req_to_client: Sending identity request to 001a.73ff.a214

Mar 13 09:50:39 10.15.1.14 2372: *Mar 1 19:24:18.890: dot11_auth_dot1x_send_id_req_to_client: Client 001a.73ff.a214 timer started for 30 seconds

Mar 13 09:51:03 10.15.1.14 2373: *Mar 1 19:24:43.549: dot11_auth_parse_client_pak: Received EAPOL packet from 001a.73ff.a214

Mar 13 09:51:03 10.15.1.14 2374: *Mar 1 19:24:43.549: dot11_auth_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,EAP_START) for 001a.73ff.a214

Mar 13 09:51:03 10.15.1.14 2375: *Mar 1 19:24:43.549: dot11_auth_dot1x_send_id_req_to_client: Sending identity request to 001a.73ff.a214

Mar 13 09:51:03 10.15.1.14 2376: *Mar 1 19:24:43.550: dot11_auth_dot1x_send_id_req_to_client: Client 001a.73ff.a214 timer started for 30 seconds

Mar 13 09:51:03 10.15.1.14 2377: *Mar 1 19:24:43.554: dot11_auth_parse_client_pak: Received EAPOL packet from 001a.73ff.a214

Mar 13 09:51:03 10.15.1.14 2378: *Mar 1 19:24:43.554: dot11_auth_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,CLIENT_REPLY) for 001a.73ff.a214

Mar 13 09:51:04 10.15.1.14 2379: *Mar 1 19:24:43.554: dot11_auth_dot1x_send_response_to_server: Sending client 001a.73ff.a214 data to server

Mar 13 09:51:04 10.15.1.14 2380: *Mar 1 19:24:43.554: AAA/AUTHEN/PPP (00000159): Pick method list 'eap_methods'

Mar 13 09:51:04 10.15.1.14 2381: *Mar 1 19:24:43.554: dot11_auth_dot1x_send_response_to_server: Started timer server_timeout 60 seconds

Mar 13 09:51:25 10.15.1.14 2382: *Mar 1 19:25:05.371: dot11_auth_dot1x_parse_aaa_resp: Received server response: FAIL

Mar 13 09:51:25 10.15.1.14 2383: *Mar 1 19:25:05.371: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server response

Mar 13 09:51:25 10.15.1.14 2384: *Mar 1 19:25:05.372: Client 001a.73ff.a214 failed: EAP reason 1

Mar 13 09:51:25 10.15.1.14 2385: *Mar 1 19:25:05.372: dot11_auth_dot1x_parse_aaa_resp: Failed client 001a.73ff.a214 with aaa_req_status_detail 1

Mar 13 09:51:25 10.15.1.14 2386: *Mar 1 19:25:05.372: dot11_auth_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_FAIL) for 001a.73ff.a214

Mar 13 09:51:25 10.15.1.14 2387: *Mar 1 19:25:05.372: dot11_auth_dot1x_send_response_to_client: Forwarding server message to client 001a.73ff.a214

Mar 13 09:51:25 10.15.1.14 2388: *Mar 1 19:25:05.373: dot11_auth_dot1x_send_response_to_client: Started timer client_timeout 30 seconds

Mar 13 09:51:26 10.15.1.14 2389: *Mar 1 19:25:05.373: dot11_auth_dot1x_send_client_fail: Authentication failed for 001a.73ff.a214

Mar 13 09:51:26 10.15.1.14 2390: *Mar 1 19:25:05.373: %DOT11-7-AUTH_FAILED: Station 001a.73ff.a214 Authentication failed

Mar 13 09:51:27 10.15.1.14 2391: *Mar 1 19:25:06.611: AAA/BIND(0000015A): Bind i/f

In IAS log I can find requests and and access is permitted.

What is the problem?

Thank you for your help!

162
Views
0
Helpful
0
Replies