Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Peap Authentication Problem

Hi,

I have a difficult situation here. I am running ACS 3.2 on W2k with SP4.On same box we have our Certificate Authority as UAD Starone, We have Enterprise Root CA on our W2k Active Directory DC.

Client side, having XP SP1, Linksys Wireless card.

Ap1200 with latest 12.2 (13)JA3. Setting are fine.

I am following the guide lines from the latest updated paper link as below:

http://www.cisco.com/en/US/customer/products/sw/secursw/ps2086/products_configuration_example09186a00801df0e4.shtml

But the errors which am getting are

on Ap1200 logs Station 000c.41af.9511 Authentication failed.

and on Acs failed Attempts Active.csv are Message Type: BAD request from NAS

Authen-Failure-Code: Invalid message authenticator in EAP request.

I am very much upset. I have checked all the trouble shootings but no success.

can someone will be able to help me or at leat tell me that where is my problem resides.

I donot know whther my problem is in Ap1200, Client, or ACS 3.2.

regards

Khaleefa

  • Security and Network Management
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Peap Authentication Problem

The ACS error message suggestion a mis match in the radius Keys, better check your keys.

1 REPLY
New Member

Re: Peap Authentication Problem

The ACS error message suggestion a mis match in the radius Keys, better check your keys.

110
Views
0
Helpful
1
Replies
This widget could not be displayed.