Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PEAP authentication with MAC filtering

Hi,

I have an SSID, which required mac filtering as first level of security and Radius authentication also. I have done necessary configuration in  ACS and WLC. In ACS, the rule for MAC filtering is taking a hit, but the users are not asked for credentials. The wireless association also fails. The mac addresses are saved in End station filter on ACS. 

Attached document has the complete configuration which I performed. Please let me know what I am missing here. Thank you.

Regards,

Madhan kumar G

1 REPLY

Hi,as per maldehne you have

Hi,

as per maldehne you have to play with the service type.

check this discussion: http://goo.gl/R9E8ae

To the authentication policy you have to add a 'service type' attributes and check based on that attribute.

based on maldehne as per the past discussion the service type value in the rule condition should be:

For MAC filtering: value should be:  call check

For 802.1x: value should be : Framed

Note that the MAC filter rule should come first.

 

Hope this helps.

 

Regards,

 

Amjad

Rating useful replies is more useful than saying "Thank you"
90
Views
0
Helpful
1
Replies
CreatePlease to create content