You have to careful while selecting the client supplicant , you can choose Cisco peap supplicant or Microsoft peap supplicant
You can have Microsoft peap supplicant or Cisco Peap supplicant .
If you have windows 2000 OS , than if you load service pack3 , Microsoft peap supplicant is installed . On top of this if you install ACU 5.05 microsoft supplicant wil be overwritten by Cisco supplicant .
In case of XP , if you install service pack 1 , it will install microsoft peap supplicant , if you install ACU 5.05 it will be overwriteen by Cisco Peap supplicant .
Microsoft peap supplicant send eap-Chap in EAP tunnel and Cisco support EAP-GTC in eap tunnel .
with non cisco card it depends on which radius server and database you are running .
At present ACS 3.1 supports EAP-GTC so it will not interoperate with Microsoft supllicant . In later release ACS will have support for EAP-Chap so
that you can use 3rd party card with Microsoft supplicant and ACS3.2
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...