Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PEAP Set up

I am looking to test PEAP, and I wanted to know if there is any documentation out there on how to set up from scratch, not only on the APs, Cisco's ACS, but on a Windows 2000 server as well. We have not implemented Active Directory, so I assume the Certificate Authority server would be a stand alone.

Any advice/help/documentation would be greatly appreciated. THANKS!!!!!

  • Security and Network Management
3 REPLIES
New Member

Re: PEAP Set up

Some very general instructions for W2K PEAP: www.missl.cs.umd.edu/Projects/wireless/8021x

And yes, your CA on your w2k server is stand-alone if you're issuing your own certificates. You just need to remember to get a copy of the trusted-root cert on to your clients so they can perform mutual authentication with the RADIUS server. Good luck, -mike

New Member

Re: PEAP Set up

IF my Authetication server (Cisco's ACS 3.1) resides on a Windows 2000 box, do I still need a separate server for my CA authority server, or can I run it on the same Win2K box?

Re: PEAP Set up

Yes you can run it on the same box. We are also using it like this.

but its not recommended.

regards Bernhard

128
Views
0
Helpful
3
Replies
This widget could not be displayed.