01-16-2003 05:58 PM - edited 07-04-2021 08:27 AM
I'm running IAS on Win2K server (added patch for PEAP suppport, box is a domain controller in an Active Directory); XP client with SP1; Cisco 352 (tried firmware 12.01T, 11.23 so far); tried both a Cisco 352 card and a Linksys card.
In the event viewer, I keep getting the error:
=======================================
User domain\username was denied access.
Fully-Qualified-User-Name = domain/Users/user
NAS-IP-Address = 10.4.2.81
NAS-Identifier = WLAB-AP352-1
Called-Station-Identifier = 00409640709d
Calling-Station-Identifier = 000625116ecb
Client-Friendly-Name = WLAB-AP352-1
Client-IP-Address = 10.4.2.81
NAS-Port-Type = 19
NAS-Port = 37
Policy-Name = PEAP Authentication Allowed Anytime
Authentication-Type = EAP
EAP-Type = <undetermined>
Reason-Code = 16
Reason = There was an authentication failure because of an unknown user name or a bad password.
=======================================
I'm an admin on the AD. I know darn well I'm entering the correct username and password.
01-18-2003 12:44 PM
I got it; never mind.
01-22-2003 01:23 PM
Could you tell me what you did to solve your problem... when I try using IAS and PEAP it keeps trying to login using the username "PEAP-mac address".
User PEAP-00097CFCD901 was denied access.
Fully-Qualified-User-Name = APPLY\PEAP-00097CFCD901
NAS-IP-Address = 172.16.200.31
NAS-Identifier = AP1
Called-Station-Identifier = 004096570d87
Calling-Station-Identifier = 00097cfcd901
Client-Friendly-Name = WirelessAP
Client-IP-Address = 172.16.200.31
NAS-Port-Type = 19
NAS-Port = 37
Policy-Name =
Authentication-Type = EAP
EAP-Type =
Reason-Code = 8
Reason = The specified user does not exist.
Note: if I add PEAP-####### as a user in Win2k I get:
User PEAP-00097CFCD901 was denied access.
Fully-Qualified-User-Name = apply.org/Users/PEAP TEST
NAS-IP-Address = 172.16.200.31
NAS-Identifier = AP1
Called-Station-Identifier = 004096570d87
Calling-Station-Identifier = 00097cfcd901
Client-Friendly-Name = WirelessAP
Client-IP-Address = 172.16.200.31
NAS-Port-Type = 19
NAS-Port = 37
Policy-Name = Wireless Policy
Authentication-Type = EAP
EAP-Type =
Reason-Code = 16
Reason = There was an authentication failure because of an unknown user name or a bad password.
Any help would be appreciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide