Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Prime 1.3 cannot see MSE evaluation licenses

Hello!

We have zero-based installed Prime 1.3 and MSE 7.3.101 virtual appliances on ESXi 5.0.

When I add MSE to Prime, on the second step (Licensing) it is seen that MSE license is not activated and there are no evaluation license at all (PI-MSE-license.jpg).

After adding MSE, in prime -> Administration -> MSE license there are also no information about any evaluation licenses.

license information from MSE

[root@mse-demo-1 ~]# getmselicenseinfo.sh

Licensing element: Tag

Licensing Limit: 100

License status: Active

License type: Evaluation

Count: 0

Unlicensed Count: 0

Number of days left: 60

Licensing element: OtherElement

Licensing Limit: 100

License status: Active

License type: Evaluation

Count: 0

Unlicensed Count: 0

Number of days left: 60

Licensing element: KAMAP

Licensing Limit: 10

License status: Inactive

License type: Evaluation

Count: 0

Unlicensed Count: 0

Number of days left: 60

Licensing element: ELMAP

Licensing Limit: 10

License status: Inactive

License type: Evaluation

Count: 0

Unlicensed Count: 0

Number of days left: 60

Licensing element: MsapSAClicks

Licensing Limit: 1000

License status: Inactive

License type: Evaluation

Count: 0

Unlicensed Count: 0

Number of days left: 60

How to make PI see MSE evaluation licences?

3 REPLIES
New Member

Re: Prime 1.3 cannot see MSE evaluation licenses

Hi

I believe the virtual MSE doesn't have an evaluation license only the appliances come with a 60 day trial.

I think you will need to a valid license onto PI for the MSE's to be seen.

Sent from Cisco Technical Support iPhone App

New Member

Re: Prime 1.3 cannot see MSE evaluation licenses

Previously I installed two different virtual MSE and both of them had evaluation licenses, which were successfully seen from Prime.

More over I already installed the same ova MSE file on the same ESXi and all was ok. The difference, is that instead of prime there was ncs 1.1

Sent from Cisco Technical Support iPhone App

Cisco Employee

Re: Prime 1.3 cannot see MSE evaluation licenses

the mse summary table not appearing is a bug reported in 7.3.101

i don't have the bugid in front of me but i know it's there...

297
Views
0
Helpful
3
Replies
CreatePlease to create content