01-14-2014 07:36 AM - edited 07-04-2021 11:57 PM
Does anyone know when Pirme 2.0 will support 7.6 WLC code?
Let me know.
thanks, rob
Solved! Go to Solution.
01-14-2014 07:52 AM
HI Rob,
Cisco PI 2.0 doent supports 7.6 as per cisco documentation :
2.0 supports from 7.0 through 7.4.110.0
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/release/notes/cpi_rn.html
PI 2.1 will support 7.6
PI 1.4.1 supports 7.6.
Regards
01-14-2014 02:46 PM
Ron,
I heard June time frame for PI 2.1. But you know how that goes:)
Sent from Cisco Technical Support iPhone App
01-14-2014 07:52 AM
HI Rob,
Cisco PI 2.0 doent supports 7.6 as per cisco documentation :
2.0 supports from 7.0 through 7.4.110.0
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/release/notes/cpi_rn.html
PI 2.1 will support 7.6
PI 1.4.1 supports 7.6.
Regards
01-14-2014 08:02 AM
Rob,
I was doing testing with you yesterday with PI 2.0 and backing up the WLC to an external FTP. I'm using WLV v7.6. PI 2.1 should be out in June.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
01-14-2014 02:31 PM
thanks guys.
i had a customer today who upgraded his WLC code to 7.6 and for some reason his Prime 2.0 server was unable to reach them...
it turns out the CLI credentials were wrong and once these were corrected things were fine.
i did however point out 7.6 code wasn't yet supported so was enquiring for him to get an estimated time.
01-14-2014 02:46 PM
Ron,
I heard June time frame for PI 2.1. But you know how that goes:)
Sent from Cisco Technical Support iPhone App
01-14-2014 03:15 PM
i did however point out 7.6 code wasn't yet supported so was enquiring for him to get an estimated time.
Tell your customer to fire up WCS instead.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: