When we run Executive Summary Report (Reports > Report Launch Pad > Network Summary > Wireless Network Executive Summary) on Prime we are getting 13 page long report.
Half of the pages (6 pages) filled with Network Air Quality vs Time information which is not giving us much value & make the report like a detail report.(no body like to scroll through 13 pages & get an idea about wireless network performance summary)
Time Radio Type AQ Minimum Index AQ Average Index
2013-Dec-05, 11:08:12 EST 802.11b/g/n 70 98.44
2013-Dec-05, 11:24:22 EST 802.11b/g/n 75 98.43
2013-Dec-05, 11:40:20 EST 802.11b/g/n 68 98.43
2013-Dec-05, 11:56:15 EST 802.11b/g/n 65 98.38
2013-Dec-05, 12:12:25 EST 802.11b/g/n 68 98.39
2013-Dec-05, 12:28:34 EST 802.11b/g/n 70 98.41
2013-Dec-05, 12:44:47 EST 802.11b/g/n 66 98.39
2013-Dec-05, 13:00:43 EST 802.11b/g/n 50 98.33
Is there anyway to get rid of this information from the Summary Report ? With WCS we did not have such a problem when generating these daily reports
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...