Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Prime Inventory Report - AP CDP fails

Hi,

The CDP information fails for some of my accesspoint in Inventory Report (report type "AP"). The AP:s switch neighboor won't show up, but you CAN see the cdp neighbor when looking at the ap in monitor mode in prime.

I have tried rebooting AP, enable/disable CDP on both switch and AP, but problem still remains.

Prime 1.3

WLC 5508, 7.0.235.0 (awaiting upgrade).

Someone have a solution?

pic1.png

pic2.png

Everyone's tags (8)
3 REPLIES
Hall of Fame Super Silver

Re: Prime Inventory Report - AP CDP fails

Well... I typically just go on the cli on the wlc and issues: show ap cdp neighbor

This is how I gather the info

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Prime Inventory Report - AP CDP fails

I did an audit between wlc and prime and the current mismatch got solved. Just retained config from controller.

Thanks anyway!

New Member

Prime Inventory Report - AP CDP fails

Kindly find the link in which all the Updating device inventory informations are given.

http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/user/guide/update_dev_inventory.html

634
Views
0
Helpful
3
Replies
CreatePlease to create content