Prime NCS: 3rd party Certificate for Admin Website

[alex.dersch]

Hey,

i'd like to create a signing request on a NCS soft appliance to install a certificate from our corporate CA.

NCS1/admin# ncs key genkey -newdn -csr server.cert repository TFTP

The WCS server is running

Changes will take affect on the next server restart

Generating RSA key

INFO: no staging url defined, using local space.        rval:2

tftp: /opt/CSCOncs/migrate/restore/server.cert: No such file or directory

i also like to modify the current Organisation and Organsiation Unit.

any ideas?

thanks

alex

[Stephen Rodriguez]

Alex,

     The only thing I can find is the following referrence:

http://www.cisco.com/en/US/products/ps6305/products_configuration_example09186a00808a94ca.shtml

The NCS guide points to this example and you should be able to input the information.

HTH,

Steve

----------------------------------------------------------------------------------------------------------

Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

[ramkris2]

Hi Alex,

You're running into a bug. Bug ID:CSCtw84405.

Please open a TAC service request to get the work-around. They can provide the root patch for NCS to access the file system & run the commands.

Ram.