I need to move my guest WLAN's webauth page from its server-1 to server-2. It has been working fine with the guest WLAN anchor controller configured to do webauth. But when it is configured to go to server-2 -- I basically just changed the "External Webauth URL" in the "Security >> Web Auth >> Web Login Page" -- then the redirection does not seem to happen.
I did ping tests from the controller command line to server-2, that works fine. DNS name look ups on my laptop also works fine with it connected to the guest WLAN but not yet authenticated.
I ran tcpdump on server-2 where I did see ICMP packets when I pinged it from the controller but nothing when I try to authenticate on my laptop.
Any help is greatly appreciated. Thanks!
[Edit]: Problems solved. I *assumed* (always a bad thing to do) that the security group has put server-2 into the rule that allow the controller/webauth communication. They did, but the IP address was typed wrong.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...