We are running WCS 6.0.132.0. We have 4 WLANS in our environment, all of which have special characters in them. They all are in production and work just fine. The issue we have is when trying to add two of the SSIDs under: Configure > wIPS Profiles > SSID Group List. One SSID contains an &, and the other a #. Example: SSID is Ac3!2#4. When put in the SSID Group List, it only shows Ac3!2. Or if the SSID is SbR6&8(, when put in the SSID Group List, it only shows SbR6.
Thank you.
