We are configuring the WLC for MAC filtering via a freeradius server.
When a client pc wants to authenticate through the WLC with the freeradius server,a shared secret is being transferred (configured in the WLC as ?radius server configuration?) instead of the MAC address of the client pc as a password (like it should be)
Very strange because this is a complete other behaviour as the Cisco AP1121G access point where the authentication with this freeradius server is working perfectly.
Is this a normal behaviour? Do I need to configure it otherwise?
Any chance that I can get a look at your config? It seems that what you're experiencing is what I'm looking for and vice versa. For username/password in my radius logs I see macaddress/macaddress but I'd like to see macaddress/sharedkey. Maybe comparing configs will show me what I might have missed?
Did you guys get anywhere with this? Our client cards are configured with the MAC as password & having just upgraded to ACS4.0, all the clients authenticating through the WLC4402 are now reporting that they can't AAA authenticate as the CS password is invalid. I've retyped the values but still won't authenticate. Any ideas?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...