Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problems with association

I try to authenticate to the wireless network (AP1200), but my Aegis Supplicant says "Connection failed: unable to associate"

Debug of the AP with options:

debug dot11 events

debug dot11 station connection failure

gives me

_____________________

*Mar 1 01:10:47.135: Client 0040.96a6.b1c2 failed: WDS Down but association attempted with network id configured

_____________________

Anybody can explain what does that mean?

_________

p.s. Sorry for my poor english

2 REPLIES
Silver

Re: Problems with association

Try to reload the infrastructure APs. Your problem appears similar to the bug-Id CSCsb56012

Re: Problems with association

It means you have WDS, Wireless Domain Services, confiugred on your access point(s). WDS is a mechanism so that AP's authenticate with a "Master AP". The commands that will let you know if you are using WDS are any that have wlccp in them. If you only have one AP, I'd say turn off WDS.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
795
Views
0
Helpful
2
Replies