Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problems with the Wireless Web GUI cisco 3850

Hello everybody, this is the problem I'm having with C3850 switch.
When i try to configure the wireless lan controller wizard using Chrome or Internet Explorer  I can not submit any changes. Also when I try to change the name or the RF group name and other things. I think that the real problem is that, when I try to access to the browser (Chrome or Internet explorer) using the switch IP returns me a certificate error. I always dismiss this issue and enter the site anyways. I think that this is is not allowing me to do important changes on the configuration of WLC. If anyone have a solution would be great.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Hi GUI of these controller

Hi 

GUI of these controller still not their best or reliable as well, so I always use CLI for the configuration. Make sure you use IOS-XE 3.6 to get whatever the GUI enhancement this product has.

If you looking for specific commands to configure a feature let us know, otherwise for general config below should helps you.

1. http://mrncciew.com/2013/09/29/getting-started-with-3850/
2. http://mrncciew.com/2013/12/04/wlan-config-in-3850-part-1/
3. http://mrncciew.com/2013/12/06/wlan-config-with-3850-part-2/
4. http://mrncciew.com/2013/12/14/3850ma-with-5760mc/
5. http://mrncciew.com/2014/08/05/client-details-in-converged-access/

 

HTH

Rasika

*** Pls rate all useful responses ****

3 REPLIES
VIP Purple

Hi GUI of these controller

Hi 

GUI of these controller still not their best or reliable as well, so I always use CLI for the configuration. Make sure you use IOS-XE 3.6 to get whatever the GUI enhancement this product has.

If you looking for specific commands to configure a feature let us know, otherwise for general config below should helps you.

1. http://mrncciew.com/2013/09/29/getting-started-with-3850/
2. http://mrncciew.com/2013/12/04/wlan-config-in-3850-part-1/
3. http://mrncciew.com/2013/12/06/wlan-config-with-3850-part-2/
4. http://mrncciew.com/2013/12/14/3850ma-with-5760mc/
5. http://mrncciew.com/2014/08/05/client-details-in-converged-access/

 

HTH

Rasika

*** Pls rate all useful responses ****

Cisco Employee

Hi ,The error is because of

Hi ,

The error is because of the fact that your browser doesnt trust the certificate produced by the 3850 switch.

For 5760 , you can rely on GUI but for 3850 , either rely on command line. 

 

Regards

Dhiresh

Cisco Employee

Try to use CLI if you don't

Try to use CLI if you don't rely on the Certificate.

192
Views
0
Helpful
3
Replies
CreatePlease login to create content