Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Public Secure Packet Forwarding does not appear to be working on APs

I have enabled PSPF on my Cisco APs and protected ports on the switch ports. Yet wireless clients can still see each other on the wireless net. Am I missing a step? Shouldn't host A (172.20.200.5) not be able to browse/ping host B (172.20.200.6)?

Example AP

interface Dot11Radio0.100

bridge-group 100

bridge-group 100 subscriber-loop-control

bridge-group 100 port-protected

Example Switch Port

description BlueAP

switchport trunk encapsulation dot1q

switchport trunk native vlan 99

switchport trunk allowed vlan 99-102

switchport mode trunk

switchport nonegotiate

switchport protected

duplex full

speed 100

no mdix auto

1 REPLY
Community Member

Re: Public Secure Packet Forwarding does not appear to be workin

Hi,

PSPF is used only when you don't want wireless clients to access shared folders with each other. Try it.

Regards

249
Views
0
Helpful
1
Replies
CreatePlease to create content