In a point-to-multipoint bridge network (1 bridge as root the others as non-root) bandwidth is shared equally. Is there a way to let for instance one non-root bridge have 4 Mbps and the other non-root bridge 2 Mbps?
Not that can be set on the bridge. The bridge only sees QoS tags and passes them on. As far as I know you'll have to do all this on the surrounding routers and switches. Can anyone else see a way to do this?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...