question on WLC 2504 HA N+1?

[baselzind]

in this HA N+1 guide for 2504 

https://rscciew.wordpress.com/2014/06/07/n1-high-availability-configuration-on-cisco-2504wlc/

in one of the steps he mention going to the Controller > MobilityManagement > Mobility Groups and entering the details of the other WLC , one of them is the mac address of the other WLC , but which mac do we choose ? is it the burned in mac address under the inventory? or is it the interface mac which managment is connected to?

[Sandeep Choudhary · Accepted solution]

Hi,

Thanks for using my post to implemnent N+1 HA on 2504.

1. Login to WLC1 and  go to  Controller > MobilityManagement > Mobility Groups , here you will find the mac address/ IP address and Group name of WLC1(as per my knowledge its the MAC address under the inventory)

2. Same method you should use for WLC2

3. Add WLC1 info in WLC2 and vice versa.

Regards

Dont forget to rate helpful posts