Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

question with 3602i APs and WLC 5508

                   Hi all,

    Please help with the following question : we have an existing wireless network (I'm new to this Cisco wireless) and broadcast several SSIDs. Each SSID is in separated VLAN so how do I find and config certain SSID into a different VLAN ? for example, I'm interesting in SSID named "BLDG-A" then check on the registered clients and find out those clients are in subnet : 172.16.1.0/24, but I need to config "BLDG-A" into subnet 182.168.1.0/24. Please educate me. Thank you very much.

1 REPLY
VIP Purple

Re: question with 3602i APs and WLC 5508

HI Duc,

Each ssid is connected to dynamic interface.so first check that this ssid is connected to whcih interface.

How to check: see the pic wlan1

You can check this interface and change there: ip address, mask and gateway. see the pic wlan2

Here is the config guide for Dynamic interface:

http://rscciew.wordpress.com/2014/01/22/configure-dynamic-interface-on-wlc/

Regards

123
Views
0
Helpful
1
Replies
CreatePlease to create content