Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

RADIUS (ACS) and WCS Authentication

Hi Folks,  I'm attempting to configure my Cisco ACS 4.1 for RADIUS authentication of the WCS Web administration login page.  Due to the ACS server having a weird TACACS issue, it doesn't like TACACS+ requests - but RADIUS seems to work ok.  My question is: How do I import the task lists into the ACS so I can assign user roles?  My WCS is V7.0.164.0.   I've found some articles on remotely importing RADIUS attributes by FTP, but I just can't work out the format for the User roles and tasks.  If anyone can offer any advice (or even pre-formatted csv files) I'd really appreciate it.  Thanks in advance  Kev

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: RADIUS (ACS) and WCS Authentication

Hi,

You can find usefull guidance with screenshots here:

http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0admin.html#wp1059965.

HTH,

Tiago

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

2 REPLIES
Cisco Employee

Re: RADIUS (ACS) and WCS Authentication

Hi,

You can find usefull guidance with screenshots here:

http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0admin.html#wp1059965.

HTH,

Tiago

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

Community Member

Re: RADIUS (ACS) and WCS Authentication

Thanks Tiago - that's got it! Kev

1871
Views
5
Helpful
2
Replies
CreatePlease to create content