Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Radius Authentication over FrameRelay WAN

Hi all

We have about 100 locations (1000 AP´s) connected over a FrameRelay WAN. Now we want implement LEAP.

Question: We have 2 redundant ACS for Authentication in the headquarter.

Is it a possible solution to take these ACS ??

3 REPLIES
Cisco Employee

Re: Radius Authentication over FrameRelay WAN

You can use that ACS over the WAN link as long as it can be reached from AP in minimum/excepted delay..Tejal

Cisco Employee

Re: Radius Authentication over FrameRelay WAN

You can do this, but you should make sure the authentication packets get priority on the network. there is a good paper showing how to do this avilable here;

http://www.cisco.com/warp/public/cc/pd/witc/ao350ap/prodlit/authp_an.htm

Cisco Employee

Re: Radius Authentication over FrameRelay WAN

In case of link down and not have backup link, how to authenticate wireless client at remote site? Are there any way to support this?

142
Views
0
Helpful
3
Replies