Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RADIUS for WLAN 4402 version 3.2

Hi all,

I am new to WLAN I have been given the task to configure RADIUS on WLAN 4402 with software version 3.2.

I have RADIUS configured on cisco 3750 switch and is working fine, just need to configure it for WLAN controller.

Any help will be much appriciated.

many thanks,

kaman.

11 REPLIES
Hall of Fame Super Silver

Re: RADIUS for WLAN 4402 version 3.2

Well that is very old code. You might want to look at upgrading first, but only if you have support and can download the code.

Here is a matrix to make sure your AP's are supported with the code you upgrade to. The latest v7.0.x is what you should upgrade to, but you would have to do incremental upgrades.

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Here us a link to radius configuration

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665d18.shtml

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

RADIUS for WLAN 4402 version 3.2

Hi,

I know it is very old version but at the moment am not allowed to upgrade .But there is an option in this version to configure RADIUS via web interface but i dont know how to go about configuring it.

any help will be much appriciated.

many thanks.

RADIUS for WLAN 4402 version 3.2

The option under Security > RADIUS, is used to configure the WLC to send 802.1x request to an external AAA server.

Do you have ACS/ISE/IAS/NPS etc running arleady?

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

RADIUS for WLAN 4402 version 3.2

Hi,

I have TekRadius running on 2003 server and I have configured AAA on my cisco 3750 switch and is  working fine.

Now i need to configure it for WLAN controller.

many thanks.

RADIUS for WLAN 4402 version 3.2

Ok, go to Security > RADIUS > and add the server IP and shared secret there.

Under the WLAN, drop down should be WPA+WPA2.  set for 802.1x.  sorry pulling from memory on this so may be slightly off

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered

RADIUS for WLAN 4402 version 3.2

On that note, IIRC WLC as a radius didn't come out until sometime in the 4.x code, and I really want to say it ws 4.1.

But as Scott said that is really old code.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

RADIUS for WLAN 4402 version 3.2

Hi,

So basically the software version no. of a WLAN controller does not matter if I am running RADIUS on a server ?

does it ?

many thanks.

RADIUS for WLAN 4402 version 3.2

Correct.  If you are running AAA off box, the WLC doesn't matter. 

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

RADIUS for WLAN 4402 version 3.2

Hi Stephen,

So on latter versions like 7.0  I can setup RADIUS on WLAN controller ?

many thanks,

RADIUS for WLAN 4402 version 3.2

yes, on later code the WLC can be a radius server

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008093f1b9.shtml

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

RADIUS for WLAN 4402 version 3.2

Hi Stephen,

Thank you ever so much.

much appriciated for your time.

kind ragards,

Kamran.

207
Views
20
Helpful
11
Replies
CreatePlease login to create content