Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Radius servers for LEAP

Which radius servers are supported by Cisco Wireless LEAP? I used Cisco ACS which worked fine, but I was wondering whether I can use Microsoft's Radius Server (Internet Authentication Server).

thanks,

-serdar

5 REPLIES
New Member

Re: Radius servers for LEAP

MS RADIUS should be fine as long as you don’t use anything MS proprietary.

New Member

Re: Radius servers for LEAP

I tried with MS Radius and it didn't work.

Have you tried it? (Note: my wireless network

settings worked just fine with Cisco ACL)

thanks,

-serdar

New Member

Re: Radius servers for LEAP

Hi, there

I have ten 350 APs (ISO is 12.0)

I have problem authentication with Microsoft IAS Radius.

Do you have any sample how to configure the Windows 2000 client to

authentication using the Network-EAP method with Microsoft IAS ?

Please give me some suggest or information. Please.....

This problem almost kill me.

email: stan@steptech.com.tw

Stan

Cisco Employee

Re: Radius servers for LEAP

LEAP will not work with Microsoft IAS server as its not supported..

You can use Funk Radius server as cisco has shared LEAP algorithams with Funk.

Cisco Employee

Re: Radius servers for LEAP

Only EAP-TLS is supported with Microsoft IAS..LEAP will not work with Microsoft IAS server and is not supported..

You can use Funk Radius server as cisco has shared LEAP algorithams with Funk.

265
Views
0
Helpful
5
Replies
CreatePlease to create content