I have 2 Aironet 350 Wireless bridges. This is the setup of the bridges
LAN--2950--BR350 -- -- BR350--2950--remote site
What is the recommended security between the bridges. I believe the 350 bridges will not do LEAP while in root bridge mode. I originally had them setup with 128-bit WEP- TKIP/MIC, but when I enable TKIP/MIC I loose IP connectivity. Anyone have any ideas or recommendations??
I am running 12.03T on both bridges. When I set MIC to MMH and TKIP to Cisco, I immediately loose IP connectivity between the bridges. Is there other settings that must be used in conjuction with MIC/TKIP that I have missed?
I am getting a bridge link up now, and both bridges have MIC/TKIP enabled. The only piece of the puzzle that is missing from previous attempts to get this to work is the remote bridge is not physically connected to a 2950 switch.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...