Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Recover from corrupt IOS Image on 1230

Hi

is there a way to recover from a corrupt IOS Image after upgrade von 12.0.8 to 12.0.11 on a 1230?

I get the following and need to recover or send the image again into flash.

---cut---

Loading "flash:/c1200-k9w7-mx.122-11.JA/c1200-k9w7-mx.122-11.JA"...###############################################################################################################################################################################################################################################################################################

bad mzip file, uncompressed to wrong length , (0x65efd6 != 0x65efe8)

Error loading "flash:/c1200-k9w7-mx.122-11.JA/c1200-k9w7-mx.122-11.JA"

Interrupt within 5 seconds to abort boot process.

Boot process failed...

The system is unable to boot automatically. The BOOT

environment variable needs to be set to a bootable

image.

C1200 Boot Loader (C1200-BOOT-M) Version 12.2(8)JA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Compiled Wed 12-Feb-03 15:23 by hqluong

ap: ?

---cut---

any help is highley appreciated.

Rgds.

Andre

1 REPLY
Silver

Re: Recover from corrupt IOS Image on 1230

You can use Xmodem to reload the IOS image on to the wireless device also. I think the procedure is same in all the APs.

http://www.cisco.com/warp/public/102/wlan/ap-fw-upgrade.shtml

The following link might be also of use for you:

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo1200/accsspts/b1228ja/b1228icg/bicgmfw.htm

652
Views
0
Helpful
1
Replies