Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

redundant SESM deployment

Hi,

I'm looking for some alternatives for a redundant deployment of the SESM application in a hotspot environment.

Currently the only option I can imagine is some L4 load balancing box (placed in front of multiple SESMs with SSG redirecting the appropriate requests to the load balancer virtual IP).

Or is there some kind of 'native' redundancy built into SESM ?

What are the common deployment scenarios ?

thanks

cheers,

Stefan

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: redundant SESM deployment

You can deploy multiple instances of the same SESM web portal and balance the load as you would with any web server application. The Cisco Content Services Switch 11000 is recommended for load balancing.Refer URL

http://www.cisco.com/en/US/products/sw/netmgtsw/ps4889/products_configuration_guide_chapter09186a00801813f1.html#1217115

2 REPLIES
New Member

Re: redundant SESM deployment

You can deploy multiple instances of the same SESM web portal and balance the load as you would with any web server application. The Cisco Content Services Switch 11000 is recommended for load balancing.Refer URL

http://www.cisco.com/en/US/products/sw/netmgtsw/ps4889/products_configuration_guide_chapter09186a00801813f1.html#1217115

New Member

Re: redundant SESM deployment

thanks for your response,

so the SLB / RLB solution seems to be the common deployment form ...

cheers,

Stefan

87
Views
0
Helpful
2
Replies