WiSM is installed on 6509. There are 85 AP's installed and being conrolled by chassis switch 6509. All AP's are running on VLAN 76 and have one dhcp pool assigned 184.108.40.206/16. I want to segregate this pool and create 10 different vlans and assigned one pool to one vlan. So whenever a user is in one particular VLAN, he should be assigned IP from that IP pool which belongs to the vlan in which user resides. kindly suggest the configuration required to achieve the desired result?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...