Reloading the renewed 3rd Party Cert on WLC 5508

[ALIAOF_]

So since my web auth cert is expiring I got it renewed from VeriSign and they sent me back the file.  Do I need to again combine the "myprivatekey.pem" file and the new one that I got and then load it on the WLC?  Can't find any guidelines and instructions from Cisco on this.  Or do I need to go through the whole regenration of CSR process again etc? 

[George Stefanick]

Hey Mohammad,

Check out my blog post on the subject. Its a step by step ...

http://www.my80211.com/home/2011/1/16/wlcgenerate-third-party-web-authentication-certificate-for-a.html

[Scott Fella · Accepted solution]

Yes you would have to combine it again.... as long as you have your private key you should be fine.  Just go through the process for generating the CSR, but skip down to where you start combining it.

Unchained Certificate:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

Chained Certificates:

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080a77592.shtml

[ALIAOF_]

Thank you, yeah that is what I ended up doing because it just didn't make sense to me that I have to go through the whole process again. So I just grabbed the private key and worked with it that way .  Now just gotta load it up on the WLC tonight.  Thank you again.