Restrict WLAN access based on SSID using shared NAR's
Using the example provided in http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807669af.shtml , I have configured several shared NAR's to restrict our WLAN access. When applied, they don't seem to do anything. If I add the NAR as a per group, it works, but then denies all other shared NAR's we have setup. I was wondering if anyone has successfully accomplished this, and how they managed to get it to work. Applying the NAR directly to users is not any option. I have even tried creating a shared nar that denies access to other SSIDs (so I have one that allows ssid1, and one that denies ssid2) but that also does not work, I can access any ssid.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...