Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Rogue access point on wire auto port shutdown

Hello,

I am unclear on the documentation. Can Cisco Prime auto shutdown switch ports that have rogue access points connected to it? The auto switchport trace feature doesn't seem to be shutting down the port on the switch. I need to know if there is a way to automate the port shutdown.

Attached is a document with my current configuration.

  • Security and Network Management
3 REPLIES
Hall of Fame Super Gold

Rogue access point on wire auto port shutdown

Can Cisco Prime auto shutdown switch ports that have rogue access points connected to it?

Not sure but you can configure the WLC to auto-contain a rogue-on-a-wire.

Rogue access point on wire auto port shutdown

you can disable the switch ports, ( Wired Rogue Access Point Switch Ports). Please refer to the switch port tracing and "switch port tracing details" from the below document.

http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/admin.html#wp1603927

For "Rogue containment " by controller, as what said by Leo, refer to

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080b40901.shtml

Cisco Employee

Today I had a chance to test

Today I had a chance to test this feature, I dont see any options to automatically disable ports that found by SPT. I think administrator need to manually disable the ports. Please correct me if I am wrong.

701
Views
0
Helpful
3
Replies
This widget could not be displayed.