cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
369
Views
0
Helpful
3
Replies

S/W upgrade on 4402 WLC

georgebigham
Level 1
Level 1

We have a 4402 with S/W 3.2.150.6 and want to upgrade to 4.0.217.0 to match other controllers. We use APs which were converted to LWAP. My concern is, will the WLC 'forget' the self signed certificates it got when the APs were converted?

3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame

Hi George,

What AP's are you talking about? 1230?

They are AP1220 which were hardware upgraded by replacing the radio card (P/N AIR-MP21G-A-K9) which makes them AP1231G.

We also had to convert them from VxWorks to Cisco IOS then convert them to LWAP.

Certificates, self-signed or otherwise, should not be a problem for your upgrade. You can always create new self-signed certs on the controller and the AP's after the upgrade.

Be sure and read the release notes and ensure that your APs are supported in the newer release, and that the Open Caveats will not cause problems for you.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: