Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

S/W upgrade on 4402 WLC

We have a 4402 with S/W 3.2.150.6 and want to upgrade to 4.0.217.0 to match other controllers. We use APs which were converted to LWAP. My concern is, will the WLC 'forget' the self signed certificates it got when the APs were converted?

3 REPLIES
Hall of Fame Super Gold

Re: S/W upgrade on 4402 WLC

Hi George,

What AP's are you talking about? 1230?

New Member

Re: S/W upgrade on 4402 WLC

They are AP1220 which were hardware upgraded by replacing the radio card (P/N AIR-MP21G-A-K9) which makes them AP1231G.

We also had to convert them from VxWorks to Cisco IOS then convert them to LWAP.

Re: S/W upgrade on 4402 WLC

Certificates, self-signed or otherwise, should not be a problem for your upgrade. You can always create new self-signed certs on the controller and the AP's after the upgrade.

Be sure and read the release notes and ensure that your APs are supported in the newer release, and that the Open Caveats will not cause problems for you.

136
Views
0
Helpful
3
Replies
CreatePlease login to create content