Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Samsung ALL share for TV on cisco wireless

Hi Guys,

I have a wireless network implemented and working in the building  with Access point and controller 4404

Now I received a requirement to use "All share samsung software" to controll TV on wireless .

So as per the requirement I connect the TV to SSID and connect my Laptop/iphone to same SID and then I should be able to present pictures or vedios on my

pc/iphone on the TV using the all share software.Will this work as it is  (currently not working ) or Do I need to make any config change on controller or AP to make this work .


Please advice.

Everyone's tags (6)
8 REPLIES
Hall of Fame Super Silver

Samsung ALL share for TV on cisco wireless

Might be the same thing that Apple devices require.... multicast.  Might want to follow this guide to setup multicast if not yet enabled.

https://supportforums.cisco.com/docs/DOC-24187

-Scott
*** Please rate helpful posts ***
New Member

Samsung ALL share for TV on cisco wireless

Thanks Scott ,

Never thought about multicast part , Let me check the possibilty of configuring it and will update you all.

Hall of Fame Super Silver

Re: Samsung ALL share for TV on cisco wireless

You can try to just enable broadcast forwarding to see if that helps first.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

Samsung ALL share for TV on cisco wireless

Yes Scott , I was about ask you that option first before  multicast

From the reference link

2> Unicast

Unicast is kind of obselete and its just a broadcast and no extra configs are need to be done apart from enabling this mode on the WLC

So what should be specifically configured to enable the  broadcast forwarding , I have WLC 4404.

Is the change to be done only on the WLC , and does this change will have any impact on the current setup

Thanks

Hall of Fame Super Silver

Re: Samsung ALL share for TV on cisco wireless

It shouldn't impact the current environment. I have clients (hospitals) that had to enable that for certain devices to be able to see each other.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

Samsung ALL share for TV on cisco wireless

Great Thanks , So hope fully I can try this tomorrow and update you

Hall of Fame Super Silver

Re: Samsung ALL share for TV on cisco wireless

Let me know.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

Re: Samsung ALL share for TV on cisco wireless

Hi Scott Fella,

Actually I dint not try the option which have specfied as I dont want to distrub the current infra.

But this time the requirement was achieved by using the adhoc option on the windows 7 to talk to the TV (ad hoc).

If they are not  happy with that , may be  I have to try the one you specified.

Thanks

2506
Views
0
Helpful
8
Replies
CreatePlease to create content