Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Scheduled time to shutdown LAP

Hi, i have WLC running IOS version 6 and bunch of AP (1142N, IOS 12.4(21a)JA) that i would like to shutdown at certain time. Eg. would like to have AP up at 6am and shut down at 7pm. Can this be done on WLC or on the switch where APs are connected to (btw, the switch with APs have poe available)?

Thanks

4 REPLIES
Hall of Fame Super Gold

Re: Scheduled time to shutdown LAP

You can get this done via two ways:

1. WCS has an option to schedule the shutdown of the radios; and

2. If your switch is a PoE switch and running the new 12.2(50)SE or higher IOS, you can configure EnergyWise.

Configuring Cisco EnergyWise

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_50_se/configuration/guide/swew.html

Hope this helps.

New Member

Re: Scheduled time to shutdown LAP

Could you pls tell me where is shutdown option located in WCS?

Thanks for a link - will check it out.

New Member

Re: Scheduled time to shutdown LAP

Hi Dragan,

You need to have WCS and WLC v 6.0. Go to configure APs then tick the ones you want to schedule and choose 'Schedule Radio Tasks' from the drop down menu.

Hope this helps

Scott

Hall of Fame Super Gold

Re: Scheduled time to shutdown LAP

294
Views
0
Helpful
4
Replies
CreatePlease to create content