Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Secure access to BR350 configuration

Is there a https or secure shell telnet access to the BR350 from the network? DoD will require all http, SNMP, and telnet access to a bridge to be disabled. The only way to configure a bridge would be via local serial port and hyperterminal. Are there a secure capability today, or plans for one in the future?

1 REPLY
Community Member

Re: Secure access to BR350 configuration

Bad news for the paranoid - even restricting mangement access to the console won't keep your AP entirely safe.

A wireless 'modem' can be attached to the serial port and provide endless access to attempt a login.

There are a few methods for physically securing the AP. The less conventional, the more valuable.

Matthew Wheeler

Chief Wireless Architect

www.BlueModal.com

237
Views
0
Helpful
1
Replies
CreatePlease to create content