I want to establish a secure wireless bridge (with a root bridge and one non root bridge). I can set in the non-root which is the MAC address of the parent, but how can I set in the root bridge with MAC is the non-root one ? I want to avoid other non root bridges can connect to the parent
Have an encryption running between the bridges. This way even if a unknown nonroot gets associated to the root, you will not be able to transmit or recevie data if the encryption keys are incorrect, and we have control over the encryption keys
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...