We have multiple AP's with a mgt VLAN, internal VLAN, and guest VLAN. The AP's connect to our switch core, but I need to secure our internal network from the guest wireless. Guest wireless should only go out to Internet.
There are various authentication methods available with Cisco APs to secure your guest and internal network. You can use 802.1x based WPA authentication on your internal network and WPA-PSK on your guest network. Here is a document which has information on the different authentication mechanisms available with Cisco APs.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...