Securing Wireless Access using ACS

[imuonagor]

We have a wireless network using Cisco Aironet APs. We also have an ACS. We wish to connect this wireless to the ACS such that users who wish to connect to the wireless network must first be authenticated (via EAP or so) by the ACS before they can get an ip address and connect to the network. I'll be glad if i can get any materials to guide me on how to implement this. Thanks in advance.

[bbxie]

try this: http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665d18.shtml

and

http://www.cisco.com/en/US/products/ps6366/prod_configuration_examples_list.html

[imuonagor]

Thanks bbxie.

However, we only have Autonomous APs and no Wireless LAN Controller. I need to configure the AP to reject connection from wireless clients until the client has authenticated with the ACS. Thanks again.